Multicriteria Decision Making (MCDM) is one the most important branches of decision theory. Due to the fact that MCDM methods have the utmost significance in management, scholars try to develop more MCDM methods. Since calculating the weights of criteria is an important step in any MCDM method, increasing the accuracy of weight calculating methods can highly affect these methods. This accuracy can be improved by less pairwise comparison between criteria. To this end, the present study seeks to make a comparison between two new weight calculating techniques, namely BWM and FUCOM in a fuzzy environment using a real-world case study Results of this study shows that FUCOM-F provides more reliable results compared to FBWM since its consistency is less than FBWM by a great amount.

The FT-IR spectrum of salicylic acid (SA) was studied in the region 10-4000 cm-1. The optimized molecular geometry and fundamental vibration frequencies are interpreted using structural optimizations based on the Functional Density Theory (DFT) method. Additionally, we used B3LYP / 6-311G (d, p) to determine the chemical descriptor, the ionization potential (I), the electron affinity (A), the chemical potential (μ), the chemical hardness (η). Nonlinear optical descriptors (NLO) such as dipole moment (μ), polarizability (α), first hyperpolarizability (β) and second hyperpolarizability (γ), 3D maps of HOMO and LUMO orbitals, lengths and Bond angles of salicylic acid isomers are also determined by both DFT and MP2 (The Møller-Plesset theory of order 2 perturbation) methods. The overall descriptors and the non-linear optical properties confirmed that salicylic acid is the reactive molecule and para-hydroxybenzoic acid is the stable molecule. An electrostatic molecular potential (MEP) study was also performed to determine the reactivity of molecules.

This paper introduces a covering model for collaborative bidirectional multi-period vehicle routing problems under profit-sharing agreements (CB-VRPPA) in bulk transportation (BT) networks involving one control tower and multiple shippers and carriers. The objective is to maximize the total profits of all parties subject to profit allocation constraints among carriers, terminal capability limitations, transport capability limitations and time-window constraints. The proposed method includes three stages: (a) generate all feasible routes of each carrier, (b) eliminate unattractive feasible routes via a proposed screening technique to reduce the initial problem size, and (c) solve the reduced problem using a branch-and-bound algorithm. Computational experiments are performed for real-life, medium- and large-scale instances. The proposed method provides satisfactory results when applied to solve the CB-VRPPA. We also conduct a sensitivity analysis on a critical parameter of the profit-sharing agreement to confirm the effectiveness of the proposed method.

Mini-Hydrostatic Pressure Apparatus (MHSPA), of spatial size 230×210×210 mm³, was developed for individual or limited number of users to promote Covid-19 social distance protocol. A solid hemisphere with an inclined circular segment made from gypsum material (CaSO₂.0.5H₂ O) and coated with filler putty and oil paint, is used in place of the regular quadrants. With the solid attached to a horizontal beam mounted over a pivot, hydrostatic forces due to liquids were measured at different heights of water. The results showed that the assembly could be used to demonstrate variation of hydrostatic pressure on circular surfaces at different heights of liquid with an average difference of 4.38% against average theoretical values. Compared to other results from the use of conventional quadrants in literature, the associated error is minimal, and indicates the possibility of adopting the apparatus in school laboratories for static pressure demonstration.

Field experiments were carried out for two consecutive seasons at the Experimental Shandaweel Agricultural Research Station, Sohag Governorate, Upper Egypt, during the growing seasons of 2013 and 2014, to study the effect of irrigation intervals and foliar spray of zinc and silicon treatments on chemical composition of maize. Results indicated that scheduling at every 10 days produced the N% , Crude protein%, Cu%, P%, K%, Zn%, Si%, Mn% and Fe% and foliar spray of zinc and silicon treatments produced the highest chemical composition of maize crop. The best N%, Crude protein%, Cu% and Mn were obtained from zinc + silicon treatments followed by zinc, silicon treatments. In contrast, untreated treatments produced the lowest values. It can be concluded that the scheduling at every 10 days and application of foliar spray of zinc + silicon treatments as the effective one could be recommended for scheduling irrigation at every 10 days with application of foliar spray of zinc, silicon or zinc +silicon treatments of maize crop at Shandaweel Agricultural Research Station, Sohag Governorate, Upper Egypt to obtain the best results from chemical composition of maize.

In most of the machining processes, the complexity arises in the selection of the right process parameters, which influence the machining process and output responses such as machinability and surface roughness. In such situations, it is important to estimate the inter-relationships among the output responses. One such method, Decision-Making Trial and Evaluation Laboratory (DEMATEL) is applied to study the inter-relationships of the output responses. Estimation of proper weights is also crucial where the output responses are conflicting in nature. In the current study, DEMATEL technique is used for estimating the inter-relationships for output responses in machining of EN 24 alloy under dry conditions. CRiteria Importance Through Inter-criteria Correlation (CRITIC) method is used to estimate the weights and finally the optimal selection of machining parameters is carried out using Techniques for Order Preference by Similarity to an Ideal Solution (TOPSIS) method. The model developed guides the decision maker in selection of precise weights, estimation of the inter relationships among the responses and selection of optimal process parameters.

A series of N-acetyl pyrazole derivatives, 1-acetyl-3-aryl-5-[5'-(4-nitrophenyl)-2'-furyl]-4,5-dihydro-1H-pyrazoles (5a-j) were synthesized by cyclocondensation reaction between 1-aryl-3-[5-(4-nitrophenyl)-2-furyl]prop-2-en-1-ones (4a-j) and hydrazine hydrate in glacial acetic acid at reflux temperature. Before that, compounds (4a-j) were synthesized by the condensation of 5-(4-nitrophenyl) furan-2-carbaldehyde (3) with various aromatic ketones by using alkali as catalyst. The constitution of the synthesized products has been characterized by using elemental analysis, Infrared,¹H-NMR, ¹³C-NMR spectroscopy and further supported by Mass spectroscopy. All the products have been screened for their in-vitro biological assay like antibacterial activity towards Gram-positive and Gram-negative bacterial strains and antifungal activity towards Aspergillus niger at a concentration of 40 µg/ml. It was exposed that the compounds 5a, 5b, 5c, 5d, 5g, 5h and 5j showed motivating antibacterial and antifungal activity compared to the used reference standard.

Cross-docking is a logistics strategy that consolidates the products of different inbound trucks according to their destinations in order to reduce the inventory, order picking, and transportation costs. It requires a high level of collaboration between inbound trucks, internal operations, and outbound trucks. This article addresses the truck-to-door sequencing problem. Truck-to-door sequencing has been studied by some researchers in different titles such as scheduling and sequencing of inbound and outbound trucks of the cross-dock center. However, previous studies have not considered repeat truck holding pattern. Therefore, it is important to determine the doors and the sequence of the inbound and outbound trucks that should be assigned in a cross-dock center. This paper focuses on optimizing truck-to-door sequencing with consideration of repeat truck holding pattern in inbound trucks in order to minimize makespan. Two methods are considered to solve this problem, including mathematical modeling and a heuristic algorithm. In the first method, a mixed integer-programming model is developed to minimize the makespan. Then, GAMS software is used to solve small-scale problems. In the second approach, a heuristic algorithm is developed to find near-optimal solutions within the shortest time possible and the algorithm is used to solve large-scale problems. The results of the mathematical model and the heuristic algorithm are slightly different and show the good quality of the presented heuristic algorithm.

Science and technological developments in the material field have been currently dedicated to a super strong material potential based on nanotechnology. The super strong material can be created from the mixture of epoxy-resin polymer and SiO₂ (silicon dioxide) nanoparticles. Polymers exist as a nanoparticle adhesive due to nano-SiO₂, which possesses a high amorphic level, resulting in a stronger, more flexible, and stiffer combination than the current super strong material. The advantages of nanocomposite polymer using epoxy- resin and nano-SiO₂ produce strong and light products with an easier production process, utilizing local materials that can improve the following material quality. This study used four material variations, namely P30, P35, P40, and P45, combined with nanoparticles at 0%, 1%, 2%, 3%, and 4%. Based on the results, the highest compressive strength level was found on the PNK 40 EH2:1N1 mixture at 53.18 MPa with 1627 kg/m3 weight density. From the X-Ray Diffraction (XRD) test results, the following mixture had the lowest amorphic phase, while Fourier Transform Infra-Red (FTIR) test results showed that the following mixture absorbed more hydrogen elements, and Scanning Electron Microscope (SEM) observation on the following material mixture had more organized particle distribution.

The present investigation was carried out to study the effects of inorganic, organic nitrogen fertilizers and activators (Humic and Fulvic acid) on chemical composition and productivity of corn. This study was conducted at Shandweel Agricultural Research Stations, Sohag Governorate, Egypt, and is situated at 26.6⁰ N latitude and 37.7⁰ E longitude. Its altitude is about 70 m above mean sea level. Also, this study was performed during two successive summer seasons 2014 and 2015. The experiments were laid down in split-split plot design with four replications. The treatments were included mineral nitrogen application in three levels (i.e. 60, 90 and 120 kg N fed.^-1), organic and bio fertilizer application (without organic and bio fertilizer, 10 m³ FYM fed.^-1 and Microbeine inoculume) as well as foliar spray of humic acid (water spraying, humic and fulvic acid spraying). The obtained results revealed that the interaction effects of all factors under study were significant for all studied traits.