This paper presents an experimental investigation on cutting temperature during hard turning of EN 24 steel (50 HRC) using TiN coated carbide insert under dry environment. The prediction model is developed using response surface methodology and optimization of process parameter is performed by desirability approach. A stiff rise in cutting temperature is noticed when feed and cutting speed are elevated. The effect of depth of cut on cutting temperature is not that much significant compared with cutting speed and feed as observed from main effects plot. The response surface second order model presented high correlation coefficient (R2 = 0.992) explaining 99.2 % of the variability in the cutting temperature which indicates the goodness of fit for the model to the actual data and high statistical significance of the model. The experimental and predicted values are very close to each other. The calculated error for cutting temperature lies between 1.88-3.19 % during confirmation trial. Therefore, the developed second order model correlates the relationship of the cutting temperature with the process parameters with good degree of approximation. The optimal combination for process parameter is depth of cut at 0.2mm, feed of 0.1597 mm/rev and cutting speed of 70m/min. Based on these combination, the value of cutting temperature is 302.950C whose desirability is one.

The objective of this work is to generalize the three echelon supply chain model proposed by Jaber and Goyal (2008) [Jaber, M. Y., & Goyal, S. K. (2008). Coordinating a three-level supply chain with multiple suppliers, a vendor and multiple buyers. International Journal Production Economics, 116, 95-103.] for multi-items where single item was considered in production and distribution. This paper develops the coordination amongst different parties in a three-echelon supply chain with a centralized decision process. Producer, suppliers and retailers are the parties of the supply chain where multiple suppliers deliver various types of raw materials to a producer; producer produces different types of items, multi-items, in different units of the factory and supplies the items to multiple retailers. Different deterioration rates for finished items and raw materials are also considered. The model developed of this paper guarantees that the local costs for the members either remain the same as before coordination, or decrease as a result of coordination. A numerical example along with graphical illustrations is considered and the sensitivity analysis is provided to test the feasibility of the proposed model.

In this paper, computational intelligence technique are presented for solving multi-point nonlinear boundary value problems based on artificial neural networks, evolutionary computing approach, and active-set technique. The neural network is to provide convenient methods for obtaining useful model based on unsupervised error for the differential equations. The motivation for presenting this work comes actually from the aim of introducing a reliable framework that combines the powerful features of ANN optimized with soft computing frameworks to cope with such challenging system. The applicability and reliability of such methods have been monitored thoroughly for various boundary value problems arises in science, engineering and biotechnology as well. Comprehensive numerical experimentations have been performed to validate the accuracy, convergence, and robustness of the designed scheme. Comparative studies have also been made with available standard solution to analyze the correctness of the proposed scheme.

Supplier selection management has been considered as an important subject for industrial organizations. In order to remain on the market, to gain profitability and to retain competitive advantage, business units need to establish an integrated and structured supplier selection system. In addition, environmental protection problems have been big solicitudes for organizations to consider green approach in supplier selection problem. However, finding proper suppliers involves several variables and it is critically a complex process. In this paper, the main attention is focused on finding the right supplier based on fuzzy multi criteria decision making (MCDM) process. The weights of criteria are calculated by analytical hierarchical process (AHP) and the final ranking is achieved by fuzzy technique for order preference by similarity to an ideal solution (TOPSIS). TOPSIS advantage among the other similar methods is to obtain the best solution close to ideal solution. The paper attempts to express better understanding by an example of an automobile manufacturing supply chain.

In this paper, an attempt is made to characterize the preservation technology for deteriorating items to reduce the deterioration rate. This model assumes a single producer and single supplier and formulates a production model with a time varying rate of deterioration rate. Here production and demand are treated as a fuzzy variables and total cost is minimized for both the crisp and fuzzy model. Shortage is allowed on the supplier’s part, which is partially backlogged. A solution procedure is presented to determine an optimal replenishment cycle and total cost per unit time, which is a convex function of preservation technology cost. Results have been validated with relevant example. In a way, the proposed model provides a unique theory to reduce the deterioration rate for the production model.

This article studies the manufacturer & apos; s pricing strategy in a supply chain with a single manufacturer and two competing retailers. The manufacturer, as a Stackelberg leader specifies wholesale prices to two retailers who face advertisement dependent demand. Based on this gaming structure, two mathematical models are developed - the cooperative advertising model where manufacturer shares a fraction of retailers & apos; advertising costs and the non-cooperative advertising model where manufacturer does not share any retailer & apos; s advertising expenses. The optimal strategies of the manufacturer and retailers are determined and a numerical example is taken to illustrate the theoretical results derived. We show that cooperative advertising policy is beneficial not only for the participating entities but also for the entire supply chain.

In this paper, an attempt is made to develop two inventory models for deteriorating items with variable demand dependent on the selling price and frequency of advertisement of items. In the first model, shortages are not allowed whereas in the second, these are allowed and partially backlogged with a variable rate dependent on the duration of waiting time up to the arrival of next lot. In both models, the deterioration rate follows three-parameter Weibull distribution and the transportation cost is considered explicitly for replenishing the order quantity. This cost is dependent on the lot-size as well as the distance from the source to the destination. The corresponding models have been formulated and solved. Two numerical examples have been considered to illustrate the results and the significant features of the results are discussed. Finally, based on these examples, the effects of different parameters on the initial stock level, shortage level (in case of second model only), cycle length along with the optimal profit have been studied by sensitivity analyses taking one parameter at a time keeping the other parameters as same.

The present study reviews different studies on inventory control of deteriorating items in chain supply published over the period 1963- 2013. The study investigates supply chain of the items in terms of various perspectives. Finally, the summary of the studies is shown in two tables for one-echelon and multi-echelon supply chain including the main information and assumptions of each paper. In the mentioned tables, the papers were classified in terms of the type of demand rate, deterioration rate, solution procedure and findings. It can be said that no analysis on the results was done in the present study and it can be only used as a good reference in the study field for other researchers.

Hsu and Hsu (2013a) established a closed-form solution for an EOQ model with imperfect quality items, inspection errors, shortage backordering, and sales returns, where the customers who return the defective items will receive full price refunds; i.e., the returned items are not replaced with good items. In this note, we extend Hsu and Hsu & apos; s (2013a) work to consider the case that returned items are replaced with good items. A closed-form solution is developed for the optimal order size and the maximum shortage level. Numerical examples are provided to show the differences in the optimal solutions when returned items are replaced, and when they are not.

In the recent decade, studying the economic order quantity (EOQ) models with imperfect quality has appealed to many researchers. Only few papers are published discussing EOQ models with imperfect items in a supply chain. In this paper, a two-echelon decentralized supply chain consisting of a manufacture and a supplier that both face just in time (JIT) inventory problem is considered. It is sought to find the optimal number of the shipments and the quantity of each shipment in a way that minimizes the both manufacturer’s and the supplier’s cost functions. To the authors’ best knowledge, this is the first paper that deals with imperfect items in a decentralized supply chain. Thereby, three different game theoretical solution approaches consisting of two non-cooperative games and a cooperative game are proposed. Comparing the results of three different scenarios with those of the centralized model, the conclusions are drawn to obtain the best approach.