This work presents a comprehensive synthesis method for the development of a new hyperbranched unsaturated polyester resin (HUPR). The resin is synthesized by modifying dehydrated castor oil fatty acid (DCOFA) with methyl methacrylate (MMA) and styrene, dicyclopentadiene-maleate (DCPD-M), and trimethylol propane diallyl ether (TMPDE). The synthesis process involves the radical addition reaction of DCOFA with MMA and styrene, followed by the addition of DCPD-M and TMPDE to form a HUPR. The resulting resin exhibits enhanced properties, making it a promising candidate for car body putty in the polymer industry.

A crucial direction in the progress of modern medical chemistry is the development and improvement of theoretical investigation methods of drugs mechanisms of action, predicting their activity, and virtual design of new drugs. This review describes the history of targeted search for biologically active compounds, current in silico approaches and tools used in the rational design of potential drugs, in particular the main computational strategies used in modern drug design are presented and outlines the main methodologies for implementing these strategies.

On the base of 3-formylpicolinic acid by two successive heterocyclizations (the formation of a pyrone fragment by the cyclization of chloroacetone with the carboxyl and formyl groups; and the construction of the thiazole cycle through the bromination of the acetyl fragment and following interaction with thioamides), 6-(2-(phenyl/thiophen-2-yl)thiazole-4-yl)-8H-pyrano[3,4-b]pyridin-8-ones were obtained; and then the pyrone fragment was converted to pyridone by the action of ammonia under high pressure. When such 6-(2-R-thiazol-4-yl)-1,7-naphthyridin-8(7H)-ones reacted with triflic anhydride, O-sulfonylation of the pyridone fragment occurred, after that triflate group was easily substituted by secondary cyclic aliphatic amines. Thus, a number of new 8-amino-6-(2-R-thiazol-4-yl)-1,7-naphthyridines – previously inaccessible heterocyclic derivatives with promising biological activity – were obtained.

The 4-bromomethyl-substituted thiazolium salts and corresponding thiazoles obtained through the condensation of 1,3-dibromoacetone with thioamide derivatives were utilised as efficient alkylating reagents for a series of thiophenols and heterylthiols. As a result, a small library of 4-thiomethyl-functionalised 1,3-thiazoles was synthesised in high yields, and their structures were characterised by ¹H, ¹³C NMR, LC-MS and IR spectra. Antioxidant activity of obtained compounds was studied in vitro using the DPPH test. The synthesised compounds showed high absorption level of DPPH radicals in the 70-98% range. For the most active derivatives 7e,m,p,t IC50 values were determined, which were in the range 191-417 µM (for ascorbic acid (reference) IC⁵⁰ value was 29 µM). Obtained radical scavenging activity screening data suggest in-depth study of the antioxidant potential for these types of heterocyclic compounds.

Condensed bicyclic systems with thiadiazole core being annelated to other five-membered heterocycles such as 1,3-thiazole, imidazole or 1,2,4-triazole occupy prominent place in medicinal chemistry because of their broad spectrum of pharmacological activities. The combination of several heterocycles into a bicyclic system commonly provides much more interest in the enhanced activity profile of its analogs than their parent separate constituents. In this review, we summarized the literature data about the main approaches for obtaining and possible directions of structural modification of the most common 1,3,4-thiadiazole containing [5+5] annelated heterosystems as promising objects for modern medicinal chemistry.

In the present work, we presented an efficient synthesis and anticancer activity evaluation of some new 3-R-6-(5-arylfuran-2-yl-[1,2,4]triazolo[3,4-b][1,3,4]thiadiazoles. We have shown that the proposed synthetic protocols provided the possibility to design triazolothiadiazoles diversity with a considerable chemical novelty. The structures of target substances were confirmed by using 1H NMR spectroscopy, mass spectrometry and elemental analysis. The synthesized compounds were selected by the National Cancer Institute Developmental Therapeutic Program for the in vitro cell line screening. Among all the substances tested, three compounds exhibited significant cytotoxic activity.

The paper proposes an improved design of a shock absorber used in drilling deep oil and gas and geothermal wells with polycrystalline diamond compact (PDC) bits. The proposed innovations successfully combat the dangerous phenomenon of self-excited vibrations, which can lead to malfunctions such as stick-slip and whirling of the drilling tool. Most conventional drill shock absorbers are designed to only absorb longitudinal vibrations, which was sufficient when using roller cutter bits for the drilling process. However, the design features of PDC bits and the phenomenon of interaction of their cutters with interlayered rocks during deep drilling impose new requirements on the properties of the drill shock absorber. To protect the downhole tool from abnormal torque values and torque oscillations, it is proposed to equip the shock absorber with a special torque transmission unit in the form of a fourteen-thread self-releasing screw pair. This unit is capable of transforming increases in external torque into increases in the force that loads the elastic element of the shock absorber. The numerical and analytical models of the mechanism of transferring external axial load and torque to the elastic element of the drill shock absorber are constructed. The distribution of contact pressures on the interacting surfaces of the screw pair and the distribution of equivalent stresses in the screw pair parts are analysed. The strength of the proposed drill shock absorber assembly was evaluated using the Huber-von Mises energy criterion. The dependence of the load transmitted to the elastic element of the shock absorber on changes in the external torque and external axial force is investigated. In general, it is determined that the external load is distributed evenly between all turns of the screw pair, and the limit state of the parts of the proposed assembly is not reached even under high-torque operating load. The obtained analytical dependencies will allow to effectively determine the required strength and stiffness of the elastic element of the drill shock absorber at the design stage. The obtained analytical results were verified using a finite element model.

A series of new derivatives of 3-(pyrrol-4-yl)acrylamides 3a-l with the pyrrole nucleus functionalized by chlorine atoms and ester group, have been synthesized by simple preparative methods from the available esters of 5-chloro-4-formylpyrrol-3-carboxylic acids 1a-e. At first, 3-(pyrrol-4-yl)acrylic acids 2a-e were synthesized by the Knoevenagel’s reaction between malonic acid and the esters 1a-e. Then the target compounds were obtained with a high yield in the reactions between chloroanhydrides of the synthesized acrylic acids and aromatic or aliphatic amines in the boiling benzene. The structure of all obtained compounds was confirmed by elemental analysis, IR, ¹H-NMR, and ¹³C-NMR spectroscopy, and additionally checked by the mass-spectrometry. Then the antimicrobial activity of all amides was tested in vitro on some gram-positive and gram-negative bacteria and fungi. It has been found that the gram-negative bacteria are resistant against the synthesized chemicals, while the gram-positive bacteria are sensitive to the amides 3с, e, f, g, i. The highest activity against Staphylococcus aureus MR and Staphylococcus epidermidis MS was registered for the amide 3f, and the retardation area diameter for this amide was greater than that for the control drugs.

Here derivatives of imidazo[2,1-b][1,3]thiazines are attractive objects for organic and medicinal chemists. In the present work chemoselective conditions for oxidation of the sulfur atom in the 6-(2-pyridinyloxy)substituted (benzo)imidazo[2,1-b][1,3]thiazines to the corresponding sulfoxides were proposed and their synthesis was performed. Synthesized sulfoxides exist in the diastereomeric mixture and individual diastereomers 2a-e and 3a-e were obtained using a chromatographic technique. The structure of compounds 2a-e and 3a-e were characterized using ¹H, ¹³C NMR, LC-MS spectra, and X-ray analysis for derivative 2b. The anti-inflammatory activity screening in vivo was performed using the carrageenan model of inflammatory paw edema in white rats for all the diastereomeric mixtures and individual diastereomers. Diastereomer 2c possessed an anti-inflammatory effect with an inflammation inhibition index of 46.1% which was equal to the activity of the reference drug diclofenac sodium.

A novel 1,3,4-thiadiazole containing 2-iminothiazolidine-4-ones 4a-b were synthesized through the reaction of 2-chloro-N-(5-ethyl/allylsulfanyl-[1,3,4]thiadiazol-2-yl)-acetamides 1a-b with ammonium thiocyanate in dry acetone. Condensation of 4a-b with various carbonyl compounds according to the standard Knoevenagel procedure yielded the corresponding 5-arylidene- (5a-d), 5-heterylidene- (6a-c), 5-isatinylidene- (7a-b) and 5-(3-phenyl-2-propene-1-ylidene)- (8a-b) derivatives. All the newly synthesized compounds were confirmed by their elemental analysis and spectral data. Synthesized compounds 4a, 5a, 5b, 6a, 6c and 7a were screened for their in vitro antitrypanosomal activity against T. brucei gambience (Feo strain). The 5-ylidene substituted compounds with S-allyl group in position 5 of thiadiazole cycle (5a, 5b, 6a and 7a) displayed good to excellent antitrypanosomal potency with a range IC50 = 7.3-12.8 µM.