In this paper, the first and second stage compressor blades of a gas turbine were studied by the experimental and numerical modal analyses. At first, the geometric models of these blades were generated by the 3D scanner and then the mode shapes and the natural frequencies of each blade were extracted by a series of numerical modal analyses. The numerical results were compared with the data obtained from the experimental modal analysis and the validity and accuracy of the developed numerical models were confirmed. Unlike most studies that use fixed-free boundary condition for performing a modal analysis, this objective was pursued by applying a free-free boundary condition. This study also investigated the effect of using wax or glue for mounting the accelerometer on the blade by assessing the FRF curves obtained from the modal tests in the frequency range of 0-10000 Hz. The sensitivity of the test results to applying free-free boundary condition, the number of accelerometers and their positions were investigated by defining three modal test configurations. The results obtained by these test configurations were compared with the results of numerical analyses and finally, the best configuration for the modal test of the studied compressor blade was determined.

The purpose of this paper is developing a method to choose an appropriate Computerized Maintenance Management System (CMMS) using Multiple Criteria Decision Making (MADM) for a dairy company. Among different methods, the grey group TOPSIS and fuzzy group VIKOR methods were selected. TOPSIS is a Technique for order of Preference by Similarity to Ideal Solution and VIKOR technique is a method based on compromise programming. The data in this article were gathered using the interviews with the company’s managers and elites in the field of maintenance. Then, out of five types of maintenance software, the best ones were selected using these two techniques and finally the results were compared with each other. In the selection process, 13 sub-criteria were introduced under 5 main criteria. These criteria were selected out of a huge number of criteria using the studies of others and by consulting with the company’s managers and experts. We have tried to make the choices in a way that the majority of aspects could be considered. This paper helps the maintenance managers in decision-making related to choosing the CMMS software in uncertainty environment. Using two different fuzzy and grey approaches and comparing the results can lead to appropriate selection and improve the confidence in decision-making. Maintenance planning issues are among the important issues in industrial production systems. Maintenance systems have basically made remarkable progress in recent years. The increase of companies’ competitive pressure on the one hand and the close relationship between maintenance activities and companies’ core activities, on the other hand, have encouraged companies to use the software in order to manage their maintenance activities.

According to connoisseurs, cultural system is encountering a fully new space in future decades and cultural indicators will be exposed by some dangers; for the same reason, cultural observation activities in management dialogue of Iran are emphasized; the concept of “observation” in Iran is facing with challenges including being far from the concepts of futures studies and the focus on “cultural indicators monitoring” while cultural engineering needs foresight and identification of affecting progressive and deterring factors on the culture. The present study aims at providing alternatives to design an observation system by considering the monitoring and scanning simultaneously to bring out strategic and futurist vision for cultural organizations. To this end, the solution space and morphological field of observation (parameters and values) by using MA/Carma Viewer software package is designed based on the literature review and forming a five-member expert group and specialized conversations. Upon Internal Consistency Assessment of parameters and by considering some values as drivers, Parameters Activity Check was conducted to study the reactions by other parameters and values. After sense-making and proper understanding of the model behavior, an Inference and “What-If” model were devised; some configurations were studied and provided in order to aware a part of proper alternatives for designing a cultural observation system (two scenarios). Scenario selection is different due to contingencies and conditions of executing the process as well as the users’ needs and goals in cultural observation system and cultural organizations can make decisions and design detailed observation systems by using morphological models, solution space and alternatives provided in the present study and depended on their goals and needs.

This paper presents a new multi-objective model for a vehicle routing problem under a stochastic uncertainty. It considers traffic point as an inflection point to deal with the arrival time of vehicles. It aims to minimize the total transportation cost, traffic pollution, customer dissatisfaction and maximizes the reliability of vehicles. Moreover, resiliency factors are included in the model to increase the flexibility of the system and decrease the possible losses that may impose on the system. Due to the NP-hardness of the presented model, a meta-heuristic algorithm, namely Simulated Annealing (SA) is developed. Furthermore, a number of sensitivity analyses are provided to validate the effectiveness of the proposed model. Lastly, the foregoing meta-heuristic is compared with GAMS, in which the computational results demonstrate an acceptable performance of the proposed SA.

Search for lost or hidden things is a very interesting and complicated issue. This problem concentrates on the study of how to exploit resources to discover a target with unknown location. On the other hand, search problem may be formulated as a difficult decision problem because it is affected by various crucial decision factors such as search cost, search time, the probability of discovering, etc. In this paper, a new multi-criteria decision making (MCDM) approach on the basis of best-worst method (BWM) and simple additive weighting (SAW) is suggested to rank potential locations of lost or hidden targets. BWM is a novel subjective weighting technique and compared to the most common subjective method, analytic hierarchy process (AHP), requires fewer comparisons and gives more trustworthy outcomes. In this paper, BWM is used to gain the criteria weights and SAW is employed to rank the locations regarding the decision factors. This study demonstrates that BWM is easier and works better than AHP, also perfect agreement in the results of COPRAS, TOPSIS and SAW is observed. The suggested approach is very easy as well as flexible and provides an efficient method which can be developed to tackle other decision problems.

Tourism industry is one of the most important parts of economic development. It can create job either directly or through stimulating other economic sectors. Therefore, it is important for policy makers to determine the best places with good potentials for tourism development. Fars province has been the center of civilization and the origin of the Iranian literature and mysticism celebrities and could be a potential investment of tourism. However, this province does not have the infrastructure required to accommodate tourists, especially during holiday seasons. This study ranks different cities located in the Fras province having the necessary potential for investment in the tourism sector by using the numerical taxonomy in terms of 12 indicators. The research population includes 29 cities in this province based on the devision of 2016. The necessary data are collected from Directorate General of Cultural Heritage, Handicrafts, and Tourism in Fars province. It is found that the cities of Shiraz, Marvdasht, Firouzabad, Sepidan, and Kazerun were the best cities for tourism investment, respectively.

Created opportunities are refered as the opportunities in which none of the supply and demand parties exists clearly and obviously one or both of them must be created. Therefore, several economic inventions should take place in marketing, franchising, etc. so that opportunity can be created. This perception of opportunity deals with the creation of new markets. In the meantime, identifying some entrepreneurial actions influencing on the creation of entrepreneurial opportunities can provide backgrounds for the formation and empowering the opportunity creation. In this paper, some basic ideas about the creation of entrepreneurial opportunities and the evolution of opportunity creation theories are examined. Then effective actions on the opportunity creation are identified. Finally, the structure of the investigated actions is examined using the DEMATLE Method. The results which were according to the opinions of 15 experts of entrepreneurship showed that leadership, decision making, and strategy actions influence other entrepreneurial actions.

The present study aimed at identifying and evaluating the factors affecting the service experience at the touch points of banking services. These factors were prioritized to help the managers understand the most important factors for achieving the favorable service experience. In this study, the theoretical foundations and interviews with customers were used to identify the factors forming the service experience at touch points. Then, the Best-Worst method (BMW) was used to evaluate and determine the significance of each identified factor. Sixteen customers participated in the interview and ten customers participated in the study by the BMW method. Six touch points and 34 factors forming the service experience were created at these points of interview analysis. The research findings showed that ‘service process’ and ‘interaction customer-employees’ for creating a favorable experience are significant in banking services. In addition, the findings showed that bank managers should allocate their resources for improving them to achieve the competitive advantage.

In today's competitive world, Six Sigma can serve as a corporate strategy to improve quality and reduce costs. Six Sigma is a comprehensive and flexible system for achieving, maintaining and maximizing organizational success, through an improved performance of processes. However, this tool can only be successful in organizations which are already prepared for Six Sigma implementation. This study investigated the readiness of an Iranian company, Tabarestan Steel Co., in terms of Six Sigma projects. In doing so, the study proposed a model designed for assessing the readiness of Six Sigma in organizations. To this end, primarily Six Sigma readiness indicators were identified through Fuzzy Delphi, by recourse to the experts’ opinions. Next the interrelationships between the indicators were examined through the Fuzzy DEMATEL method. The internal links between the indicators were determined after the examination, and the degree of importance and the weights of the indicators were decided. Ultimately, three highly important dimensions were discovered that had a significant function in Six Sigma implementation (leadership and perspective, corporate strategy, and focus on the customer).

The international strategic alliance is an inevitable solution for making competitive advantage and reducing the risk in today’s business environment. Partner selection is an important part in success of partnerships, and meanwhile it is a complicated decision because of various dimensions of the problem and inherent conflicts of stockholders. The purpose of this paper is to provide a practical approach to the problem of partner selection in international strategic alliances, which fulfills the gap between theories of inter-organizational relationships and quantitative models. Thus, a novel Robust Fuzzy Possibilistic AHP approach is proposed for combining the benefits of two complementary theories of inter-organizational relationships named, (1) Resource-based view, and (2) Transaction-cost theory and considering Fit theory as the perquisite of alliance success. The Robust Fuzzy Possibilistic AHP approach is a novel development of Interval-AHP technique employing robust formulation; aimed at handling the ambiguity of the problem and let the use of intervals as pairwise judgments. The proposed approach was compared with existing approaches, and the results show that it provides the best quality solutions in terms of minimum error degree. Moreover, the framework implemented in a case study and its applicability were discussed.